Processing memory overflow problewm

Discussions of Q-SYS hardware and software.

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Fred Thomke, Gary Evans_QSC, Chris Brouelette

Wed Apr 26, 2017 11:21 pm

  • Hi everyone, I'm a fresh q-sys programmer. I just met an "processing memory overflow" error in my design. Anyone can help to tell what is this problem and how to fix it? Many thanks~~
    qsc_error.png (54.22 KiB) Viewed 638 times
    Posts: 1
    Joined: Mon Apr 17, 2017 1:33 am

  • Did you get a response from QSC regarding this? It would be helpful to know what caused this.

    QSC seem to have gone dead on this forum. Its a bit disappointing.
    Callum Brieske
    Posts: 23
    Joined: Thu May 07, 2015 4:00 am

  • I can't speak authoritatively on this, but I believe that different audio processing modules require different CPU and memory resources.

    I've found that the audio "effects" (e.g. reverb, flanger) tend to use more memory - presumably because they require a longer history of samples in order to create the effect.
    If you have a lot of these modules, you can run out of memory before CPU (whereas usually the CPU would impose the processing limit).

    What do you have in your design?
    Possibly an old pro
    Posts: 26
    Joined: Fri Nov 06, 2015 1:59 am

Return to Q-SYS Support

  • Users browsing this forum: No registered users and 1 guest