GX5 Ch1 Clip light always on , no output

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC, QSC-Dale Sandberg


  • I was using this amp on a regular basis, 4 ohm load, normal situation for the last 3 years or so, then it went into protect on ch1 and i cant seem to re set this, or is there a re set? or does it need to go the shop? i was hoping there was something i could do before taking it in... both fans come on , or what ever fan there is is on and working, ch2 just fine.
    any suggestions are helpful thank you
    Rockfish
    Newbie
     
    Posts: 2
    Joined: Tue Nov 15, 2016 2:44 pm
    Location: Tampa Fla


  • Hi Rocky,

    Unfortunately, there's no reset. There's something wrong with channel 1 and it's in protect to keep the loudspeaker safe. It'll have to be serviced by a qualified technician.

    At www.qscservice.com you can obtain an RMA for factory service or locate an authorized QSC service center.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California




Return to Power Amplifier Support




Information
  • Users browsing this forum: Google [Bot] and 1 guest