K10

K, KW, and KLA Series loudspeakers

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC

Tue Jun 14, 2016 12:41 pm

  • Hi, what is the best method to daisy chain 2 k10's, 2 k12's and 2 subs?
    thx
    barflyz
    Rookie
     
    Posts: 8
    Joined: Wed Aug 18, 2010 6:18 am

Tue Jun 14, 2016 2:29 pm

  • The K Series loudspeakers have parallel connectors on each input to facilitate daisy-chaining. For example, the male XLR connector under the input combo (1/4" TRS + XLR) jack is parallel-connected to the combo. Therefore, you run a signal into the top connector and then use the connector right underneath to send the signal on to the next loudspeaker. That's all there is to it.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California

Mon Aug 29, 2016 7:05 am

  • Do recommend board to K sub then to K10 or vice versa or does it matter?
    barflyz
    Rookie
     
    Posts: 8
    Joined: Wed Aug 18, 2010 6:18 am



Return to K Family Loudspeaker Discussion




Information
  • Users browsing this forum: No registered users and 1 guest