Just upgraded to K 12.2 but have a Peavey Sub

K, KW, and KLA Series loudspeakers

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC


  • I upgraded my mixer to the QSC 16 and two K 12.2.

    I didnt have enough to upgrade my single sub.

    I have one Peavey PVxP 800W 15" Powered Subwoofer

    What is the best way to connect my sub?

    Should I connect it the C out of one speaker? Or should I do something different like connect it to one of the AUX outs in the mixer ?
    rleon
    Newbie
     
    Posts: 1
    Joined: Fri Jul 07, 2017 6:15 pm


  • I don't know the hookups on the Peavey sub, but they might be able to help you with that.

    You can run both a sub and the main loudspeaker(s) off the main output(s) of the mixer. Find out what the Peavey's low-pass filter is and then set the high-pass on the K12.2 to match it.

    If you want instead to control which instruments go to the sub, then run the sub off an AUX out and turn off the sub filter on the K12.2.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California



Return to K Family Loudspeaker Discussion




Information
  • Users browsing this forum: No registered users and 1 guest
cron