k10 has power and signal but no sound after 3 hours

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC


  • Previously, my K10 has worked flawlessly in the hottest of conditions. Recently at all the venues I work at, the QSC will just stop working after about 3 - 3.5 hours of use. No matter which input I use, the signal light is blinking and the fan is still spinning. The audio just stops. The next day, I turn it on and boom, it works again but only for another 3 hours straight. Any ideas?

    Thank you in advance for replies.
    Aarons
    Newbie
     
    Posts: 2
    Joined: Sun May 14, 2017 4:57 pm


  • Are you in the US? Call our Technical Services Group at 1 800 QSC AUDIO or +1 714 957-7150 and talk to one of the service engineers. They'll talk through the symptoms and work with you on a solution.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California




Return to Loudspeaker Support




Information
  • Users browsing this forum: No registered users and 1 guest