E10 horizontal flying

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC

Tue May 23, 2017 6:38 am

  • Hi all,
    Does anyone know if it is possible to fly the E10s horizontally? The QSC website for the yoke mount kit says it is for vertical placement only. I need a wide dispersion and a lot of down-tilt, hence my thinking about horizontal rigging. However even with the eyebolt rigging (in a vertical orientation), there is still no way to angle the cabinets down. Anyone have any ideas of a clear answer on how to achieve this please?

    Thanks in advance,
    Duncan
    BOVsound
    Newbie
     
    Posts: 2
    Joined: Mon May 22, 2017 4:15 am

Tue May 23, 2017 9:45 am

  • You can mount the loudspeaker and yoke horizontally or vertically. See the quick start guide attached.
    Attachments
    q_spk_eseries_yoke_quickstart.pdf
    (204.19 KiB) Downloaded 33 times
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California

Tue May 23, 2017 10:10 am

  • Thank you Bob. A lot of conflicting information on the QSC website, and many dealers don't seem to know the answer. So I'm glad that's cleared up!
    BOVsound
    Newbie
     
    Posts: 2
    Joined: Mon May 22, 2017 4:15 am

Wed May 24, 2017 10:43 am

  • If you could let me know which page you saw the incorrect information on I could get someone on our web team to fix it. Thanks!
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California



Return to Loudspeaker Support




Information
  • Users browsing this forum: No registered users and 1 guest