gx7

Moderators: Cameron Shoffner, Christian Cook, Kirk Fyvie, Martin Barbour, Gary Evans_QSC, QSC-Dale Sandberg

Wed Apr 05, 2017 2:58 pm

  • how can i use the internal crossover to run both sides on my amp
    dj john
    Newbie
     
    Posts: 2
    Joined: Wed Jul 23, 2014 5:29 pm

Thu Apr 06, 2017 10:02 am

  • With the internal crossover engaged, input 1 is the active one. Channel 1 will put out frequencies below 100 Hz for your subwoofer, and channel 2 will put out all the frequencies above 100 Hz, for one or two full-range loudspeakers.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California

Thu Apr 06, 2017 5:14 pm

  • Bob This much I realized. so there is no way to use the crossover on BOTH channels ? Other than of course an external crossover
    dj john
    Newbie
     
    Posts: 2
    Joined: Wed Jul 23, 2014 5:29 pm

Thu Apr 06, 2017 6:00 pm

  • The crossover is on both channels: below 100 Hz comes out of channel 1 and above 100 Hz comes out of channel 2.
    Bob Lee
    Technical Communications Developer
    QSC, LLC
    Fellow, Audio Engineering Society
    Image
    "If it sounds good, it is good." —Duke Ellington
    User avatar
    Bob Lee
    QSC Audio Products
     
    Posts: 2518
    Joined: Thu Mar 06, 2003 2:01 am
    Location: Costa Mesa, California



Return to Power Amplifier General Discussion - Applications, tips and tricks, and more




Information
  • Users browsing this forum: No registered users and 1 guest